1 MM & 1.25 MM Sheets

MATLAB Luxury Laminates go through some of the most stringent quality tests in the industry. Before a MATLAB product becomes a part of your home or office space it goes through thorough tests for heat resistance, crack-resistance, stain-resistance and scratch test all at an ISI certified laboratory equipped with specialised Q&A machines from Germany and the USA.

  1. 1
    SPECIFICATIONS

    Properties Specified values as per IS: 2046 – 1995, Type S, HGS
    Thickness 1.00mm  –  1.25mm (±0.10mm)
    Dimensional stability at deviated temperature
    – Longitudinal (%)
    – Transverse (%)
    0.55 (Maximum)
    1.025 (Maximum)
    Dimensional stability at 20˚C
    – Longitudinal (%)
    – Transverse (%)
    0.375 (Maximum)
    0.60 (Maximum)
    Resistance to dry heat 180˚C Not worse than Grade 4
    Resistance to immersion in boiling water
    – Mass increase (%)
    – Thickness increase (%)
    – Appearance
    10.0 (Maximum)
    11.8 (Maximum)
    Not worse than Grade 4
    Resistance to impact by small diameter ball 20 N (Minimum)
    Resistance to cracking Not worse than Grade 4
    Resistance to scratching 2 N (Minimum)
    Resistance to staining Not worse than Grade 5
    Resistance to cigarette burns Not worse than Grade 3
    Resistance to steam Not worse than Grade 4
    Resistance to colour change (wool standards)
    – In Xenon arc light
    – In enclosed Carbon arc light
    Not worse than Grade 6
    Not worse than Grade 5
    Resistance to surface wear 350 (revolution)
    Appearance Should be free from foreign particles